Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light on a Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light

See other generations:
Video tutorial

How do you replace the rear light on a Ford Focus? Let's see how to remove the components in the boot to access the rear light. Open the boot lid, then use a plastic spatula to detach the cover on the side trim of the boot.

Unscrew the securing nuts of the rear light, disconnect the power connectors attached to the light, and pull it out from its housing. Replace any damaged bulbs with new ones at hand.

Refit the light with the respective securing nuts, replace the inspection cover, and finally, test the correct operation of the lights. Replace the rear light if damaged.


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light of a Ford Focus
How to Remove the Rear Light of a Ford Focus
Ford Focus (2011-2018 / MK 3) Open the boot and secure it; locate the screws securing the rear light (inside the boot); open the plastic inspection cap (located in the boot) and u…
Changing Rear Light Bulb on Ford Focus 2016
Ford Focus (2011-2018 / MK 3) How do you change the bulb in the rear light of a Ford Focus? Let's see how to remove the rear light from inside the car's bodywork. Open the boot li…
Replacement of the rear taillight of the Ford Focus
Replacement of the rear taillight of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today we will see the information that will show us how to disassemble and replace the rear taillight and its bulbs of the Ford Focus. First, we open…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos