Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Front Brake Pads on a Ford Fiesta (2008-2016)

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Brake pads

Today, you will learn how to remove and replace the front brake pads on a Ford Fiesta (2008-2016). First, lift the vehicle, even if just the front end, and remove the wheel. Next, unscrew the two bolts securing the brake caliper, located on the rear side, using two spanners, as shown in the video. At this point, remove the caliper from the disc and replace the brake pads; clean the caliper of any carbon residue before fitting the new pads. Use a lever on the piston to assist with installation!

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Brake Pads on a Ford Fiesta
How to Replace Brake Pads on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today, I will show you how to replace the brake pads on your Ford Fiesta. First, lift the car and remove the wheel. Next, unscrew the front bolts to …
How to replace the front brake pads of the Ford Fiesta
How to replace the front brake pads of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today we will see the instructions that will show us how to disassemble and replace the front brake pads of the Ford Fiesta. First, lift the vehicle …
How to Replace the Brake Pads on a Ford Fiesta
How to Replace the Brake Pads on a Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To replace the brake pads on a Ford Fiesta, follow the same procedure for both the front and rear wheels: lift the car so that the wheel is not in co…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos