Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front brake pads of the Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Brake pads

Today we will see the process of how to disassemble and replace the front brake pads of the Ford Fiesta. First, we lift the car and remove the front wheel; then we unscrew the fastening screws of the front brake caliper, applying pressure on the caliper piston to retract it, as shown in the video. At this point, we clean the brake caliper from any remaining dirt, installing the new front brake pads; we reassemble the brake caliper on the disc, carrying out the same operation for the replacement of the other front pads.

Posted on 7 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front brake pads of the Ford Fiesta
How to replace the front brake pads of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today we will see the instructions that will show us how to disassemble and replace the front brake pads of the Ford Fiesta. First, lift the vehicle …
Replace the Front Brake Pads on a Ford Fiesta (2008-2016)
Replace the Front Brake Pads on a Ford Fiesta (2008-2016)
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today, you will learn how to remove and replace the front brake pads on a Ford Fiesta (2008-2016). First, lift the vehicle, even if just the front en…
How to Replace the Brake Pads on a Ford Fiesta
How to Replace the Brake Pads on a Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To replace the brake pads on a Ford Fiesta, follow the same procedure for both the front and rear wheels: lift the car so that the wheel is not in co…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos