Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radiator Hose on Ford Fiesta 1.4i 16V

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008

In this video, you will find instructions to remove and replace the radiator coolant hose on a Ford Fiesta 1.4i 16 valve, from 2002 to 2008. First, open the bonnet of your car and remove the upper engine cover by unscrewing the fixing screws; then, unscrew the clamp screw of the coolant hose to loosen it. At this point, remove the hose, allowing any excess fluid to drain; then, detach it from the other end (i.e., from the radiator) by loosening the metal clip. Finally, replace the hose!

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Coolant in a Ford Fiesta Radiator
Replacing the Coolant in a Ford Fiesta Radiator
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) Let's look at the removal and replacement of the coolant in a Ford Fiesta radiator. Disconnect the radiator hose at the bottom using a socket wrench …
Dismantle the Radiator from the Ford Fiesta
Dismantle the Radiator from the Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Dismantling the radiator from the Ford Fiesta? Here’s how to remove the damaged part. Open the front bonnet, detach the soundproofing panel from the …
Instructions for Replacing the Radiator Fan on a Ford Fiesta
Instructions for Replacing the Radiator Fan on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In today's video, you will see the main steps to disassemble and replace the radiator fan on a 2011 Ford Fiesta. First, open and lift the bonnet; the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos