Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Car Radio on Ford Fiesta MK6

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Car stereo

Today, you will learn how to remove and potentially replace the car radio on the Ford Fiesta sixth series, from 2008 to 2017. First, get inside the car and remove the upper plastic panel found on the radio by prying at the sides; then remove the front trim and unscrew all the fixing screws located underneath using a Torx screwdriver. Next, remove the car radio by disconnecting the electrical connectors at the back; then reassemble everything by applying the reverse procedure of disassembly!

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from the Ford Fiesta
How to Remove the Radio from the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) This guide shows you how to remove and replace the standard radio in the Ford Fiesta, following the instructions below. First, get inside the vehicle…
How to remove the radio from a Ford Fiesta 6
How to remove the radio from a Ford Fiesta 6
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this short video tutorial, see the steps necessary to remove the radio from a sixth-generation Ford Fiesta, produced from 2008 to 2017. Using a pl…
How to Reset the Factory Radio of the Ford Fiesta
How to Reset the Factory Radio of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) The instructions in this guide will illustrate how to perform a forced reset of the factory radio of the Ford Fiesta. First, get into the vehicle and…

    Frequently Asked Questions

    • Fiesta 2008-2017 - What to do when the Ford Fiesta radio doesn't work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos