Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper from the Ford Focus MK4

Model: Ford Focus MK 4 - Years 2018-2025
Part: Front bumper

In today's video, you will see how to remove the front bumper from the fourth series Ford Focus, from 2019, following the instructions below. First, open the bonnet of your car and start by removing the fastening screws located on the top, using a T30 Torx spanner; then, remove all the plastic clips found on both sides of the wheel arches and under the front bumper, as illustrated in the video. Once all the fastenings are removed, you can take out the front lights before removing the bumper, as shown in the video!

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Bumper on a Ford Focus?
How to Replace the Front Bumper on a Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) In this tutorial, you will see how to remove the front bumper on a Ford Focus. First, open the bonnet. Then, undo all the fastening screws located on…
How to Remove the Centre Grille on Ford Focus
How to Remove the Centre Grille on Ford Focus
Ford Focus (2011-2018 / MK 3) How to remove the centre grille located on the front bumper of a Ford Focus. Once the car's bumper is removed, use a plastic lever or screwdriver to …
Removing Front Bumper on Ford Focus
Removing Front Bumper on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today, you will learn how to remove the front bumper from a second-generation Ford Focus. First, detach the front fog light grilles using a lever. Ne…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos