Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Kuga
    4. : How to replace the injectors on the Ford Kuga MK2 1.5 TDCi (PSA engine)

Ford Kuga - Video tutorial

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Injectors
Operation: How to replace the injectors on the Ford Kuga MK2 1.5 TDCi (PSA engine)

In today's video tutorial we will see how to remove and replace the fuel injectors on the Ford Kuga 1.5 TDCi, but also on the 2.0 TDCi with PSA engine. First we open the engine hood and remove the upper plastic protection; after which we unscrew the fixing screws of the upper cover, as shown in the video. At this point we disconnect the electrical connectors of our injectors, releasing the tabs; then we are going to remove the injectors, using a ratchet wrench with extension. For reassembly, just apply the reverse procedure!


Posted on 24 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Kuga 2012-2019 - How much does it cost to replace the injectors of a Ford Kuga? Read Answer
    • Kuga 2008-2012 - How much do the Ford Kuga injectors cost? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos