Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Injector Seals on a Ford Focus 1.6 TDCi

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Fuel injectors

See other generations:
Video tutorial

Today's main steps will show you how to remove and replace the diesel injector seals on a Ford Focus. First, open the engine bonnet and start by removing the plastic cover from the top of the engine; then disconnect the electrical connector of the injector to be serviced, unscrewing the screws and using the appropriate tool to remove it, as shown in the video.

At this point, remove the old seal found at the base, replacing it with a new original one; replace all seals if necessary, finally reassembling the injectors.


Posted on 15 April 2026 by ScegliAuto


Related tutorials

Disassembly and replacement of injectors for the Ford Focus 1.6 TDCi.
Disassembly and replacement of injectors for the Ford Focus 1.6 TDCi.
Ford Focus (2004-2011 / MK 2, Focus 2) The instructions in this guide will show us how to disassemble and replace the diesel injectors of the Ford Focus 1.6 TDCi. First, we open the hood o…
Replacing the Fuel Injectors on the Ford Focus MK2 1.6 - 1.8 TDCI
Replacing the Fuel Injectors on the Ford Focus MK2 1.6 - 1.8 TDCI
Ford Focus (2004-2011 / MK 2, Focus 2) In this video, you will see the main instructions for removing and replacing the fuel injectors on the second generation Ford Focus with 1.6 and 1.8 …
Removing Injectors from Ford Focus TDCi
Removing Injectors from Ford Focus TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) In today's video tutorial, learn how to remove the injectors from a 2008 Ford Focus TDCi. First, open the bonnet and disconnect the various cables an…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos