Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Timing Belt Replacement on Ford Kuga 2.0 TDCi

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Timing belt

See other generations:
Video tutorial

Here is how to remove and replace the timing belt on the Ford Kuga 2.0 TDCi. First, open the bonnet of the vehicle and start by removing the engine support on the timing side, then remove the cover. Lift the vehicle and remove the front right wheel and the wheel arch liner, then disconnect the drive belt and remove the crankshaft pulley, as shown in the video.

At this point, take the necessary references for replacing the timing belt, installing the new original one; reassemble all the timing components in order.


Posted on 13 May 2026 by ScegliAuto


Related tutorials

When to Change the Timing Belt on a Ford Kuga 2.0 TDCI?
Ford Kuga (2008-2012 / MK 1, C394) This guide provides important instructions regarding the replacement of the timing belt on the first series Ford Kuga with a 2.0 TDCI 143 hp engine. …
Guide to Replacing the Timing Belt on a Ford Kuga 2.0 TDCi
Guide to Replacing the Timing Belt on a Ford Kuga 2.0 TDCi
Ford Kuga (2008-2012 / MK 1, C394) Today we will see the instructions to remove and replace the timing belt on the Ford Kuga 2.0 TDCi. First, open the engine bonnet and begin by removi…
How do you replace the timing belt of the Ford Kuga 2.0 TDCi?
How do you replace the timing belt of the Ford Kuga 2.0 TDCi?
Ford Kuga (2012-2019 / MK 2, C520) The executive procedure for replacing the timing belt of the Ford Kuga 2.0 TDCi is similar to many other cars, as it is mainly carried out from below…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos