Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to replace the Ford Focus interior light bulb?

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Light bulb
Operation: How to replace the Ford Focus interior light bulb?

In order to replace the Ford Focus interior light bulb, you need to use an object that acts as a lever to extract the ceiling light from its housing. In this way, it will be possible to access the central black support, on which the bulb is located. By rotating the support, it can be extracted from its housing and the bulb can be replaced. Once the bulb has been installed on the support, it must be inserted into the ceiling light, which can be repositioned in its seat. After the replacement, the function of the new bulb can be checked.


Posted on 4 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - How to replace the sidelights bulb on the Ford Focus? Read Answer
    • Focus 2018-2025 - How much does the position light bulb cost for the Ford Focus? Read Answer
    • Focus 1998-2004 - What to do if the Ford Focus hood light does not come on? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos