Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Radio on a 2020 Ford Kuga

Model: Ford Kuga MK 3 - Years 2020-2026
Part: Car stereo

In today's video, you will see how to remove and replace the radio, and thus the entire multimedia system, on the third generation Ford Kuga (2020), following the instructions below. First, get inside the vehicle and start by removing the plastic cover at the back, prying it off from the sides; then unscrew the screws underneath using a socket spanner. At this point, disconnect the electrical connector to remove the display; to access the entire unit, it will be necessary to disassemble the entire central part of the instrument panel, as shown in the video.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Kuga (2008-2012 / C394, MK 1) Replacing the radio on a Ford Kuga? Here’s how to remove the radio using the handy removal keys. Insert the keys into the slots on the sides of the p…
Ford Kuga (2008-2012 / C394, MK 1) In this video, you will learn how to remove the radio with display from a Ford Kuga. First, get inside the car and obtain some plastic levers to uncl…
Ford Kuga (2012-2019 / C520, MK 2) To retrieve the radio code for your Ford Kuga, you will need to extract it from its housing, and here’s how to do it. Obtain a plastic lever and remo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos