Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Ford Fiesta mk 7

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Car stereo

To remove the radio from a Ford Fiesta mk 7, obtain a flathead screwdriver; use this screwdriver to remove the rectangular plastic cover located beneath the radio; disconnect the cables. Using the screwdriver, attempt to remove the plastic cover above the radio and display. Take a Torx key and remove the screws, also using the key. Once all screws are removed, pull out the radio by gently tugging it towards you. Disconnect the connector, remove the internal radio; position the new radio and proceed to reassemble all components in reverse order. Check the operation.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from a Ford Fiesta
How to Remove the Radio from a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) How to remove the radio from a Ford Fiesta? Use original removal keys for the radio. Insert the keys into the holes on the plastic cover of the radio…
How to Remove the Original Radio from a Ford Fiesta
How to Remove the Original Radio from a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Follow these steps to remove the radio from a Fiesta and how to replace it. First, remove the plastic trim around the centre console (original or gen…
How to Remove the Radio from the Ford Fiesta
How to Remove the Radio from the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) This guide shows you how to remove and replace the standard radio in the Ford Fiesta, following the instructions below. First, get inside the vehicle…

    Frequently Asked Questions

    • Fiesta 2008-2017 - What to do when the Ford Fiesta radio doesn't work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos