Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Adjusting the Headlights on a Ford Fiesta MK6

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

See other generations:
Video tutorial

In today's tutorial, you will learn how to manually adjust the headlights on a sixth-generation Ford Fiesta in simple and quick steps. First, open the bonnet and locate the headlight adjustment screw, which is found behind the headlight (usually a yellow plastic screw); then use a hex key to loosen or tighten the screw, depending on whether you want to lower or raise the headlight and thus the beam, as shown in the video.

At this point, get inside the vehicle to complete the adjustment operation using the knob!


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to adjust the headlight height of the Ford Fiesta
How to adjust the headlight height of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Below are the steps that will allow you to adjust the height of the front headlights of the Ford Fiesta. Before adjusting the headlights, set the sel…
How to Replace the Front Headlight Bulbs of the Ford Fiesta
How to Replace the Front Headlight Bulbs of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Today, you will learn the steps to replace the front headlight bulbs of the Ford Fiesta. The first step is to open the bonnet. The second step is to …
Where Are the Fuses of the Ford Fiesta Located?
Where Are the Fuses of the Ford Fiesta Located?
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) The fuses of the Ford Fiesta are located inside two fuse boxes installed within the car: this model has two boxes containing the fuses. The first is …

    Frequently Asked Questions

    • Fiesta 2008-2017 - What does MCA mean on a Ford Fiesta? Read answer

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos