Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery in a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Key

In today's video, we will see how to replace the dead battery in a Ford Fiesta remote. Start by removing the plastic cover on the back. Now extract the metal key (if it is a keyless remote) and then use a screwdriver to pry it open. Remove the battery and replace it with a new one (of the same type, CR2032 3V). Now you can proceed to reassemble the remote and test if it is working correctly again. As we have seen, this was a very simple operation that will take you little time.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Ford Fiesta Key
How to Replace the Battery in a Ford Fiesta Key
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) How to replace the battery in a Ford Fiesta key remote? In this video, see how to proceed with the battery replacement. Take your key remote and use …
How to Replace the Remote Battery of the Ford Fiesta?
How to Replace the Remote Battery of the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To replace the battery of the Ford Fiesta, use a tool to pry off the cover on the back of the remote, allowing you to remove the emergency key inside…
Replacing Key Fob Battery on Ford Fiesta
Replacing Key Fob Battery on Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this video, see how to disassemble and replace the battery of the key fob for a Ford Fiesta MK8 by following these steps. First, take the key fob …

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - What does the yellow wrench light on the Ford Fiesta mean? Read answer
    • Fiesta 2008-2017 - What does the wrench light on my Ford Fiesta mean? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos