Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlights from the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Headlight

In today's video tutorial, you will learn how to remove and replace the front headlights of the Ford Fiesta by following these simple and quick steps. First, open the bonnet of your car and start by unscrewing the screws at the top of the front headlight; then remove the plastic clip and disconnect the electrical connector of the bulbs in the headlight unit, as shown in the video. At this point, gently unclip the front headlight until it is completely removed; simply reassemble everything by applying the reverse procedure!

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Front Headlights on Ford Fiesta
Removing Front Headlights on Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video tutorial, you will learn how to remove the headlights and replace the bulbs on the Ford Fiesta. First, open the engine bonnet: release …
How to adjust the headlight height of the Ford Fiesta
How to adjust the headlight height of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Below are the steps that will allow you to adjust the height of the front headlights of the Ford Fiesta. Before adjusting the headlights, set the sel…
How to Remove Front Headlights on Ford Fiesta
How to Remove Front Headlights on Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Want to replace the headlights on your Fiesta but not sure how? Let’s look at removing the front headlights. Remove the central grille before taking …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos