Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Wiper Blades on the Ford Transit

Model: Ford Transit MK 6 - Years 2000-2006
Part: Windshield wipers

To replace the wiper blades on the Ford Transit, lift the arm so that the blades are not in direct contact with the windscreen. Next, tilt the blade until it is perpendicular to the arm: this will allow you to slide the blade down, freeing it from the arm so it can be replaced with a new spare part. Once the new blades are fitted onto the ends of the arms, position them on the windscreen, ensuring they function correctly.

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Starter Motor on the Ford Transit?
How to Replace the Starter Motor on the Ford Transit?
Ford Transit (2006-2014 / MK 7) To replace the starter motor on the Ford Transit, access the lower part of the engine bay: here, immediately next to the oil tank, you will find the …
Where to Find the Fuse Box of the Ford Transit Mk7
Where to Find the Fuse Box of the Ford Transit Mk7
Ford Transit (2006-2014 / MK 7) In this guide, you will discover where the fuse box is located inside your Ford Transit Mk7 (2006-2014) and what you need to do to access the fuses f…
How to Replace the Cabin Filter on a Ford Transit
How to Replace the Cabin Filter on a Ford Transit
Ford Transit (2014-2024 / MK 8) To replace the cabin filter on a Ford Transit, remove the screws securing the plastic panel located immediately under the glove compartment on the pa…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos