Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to release the spare wheel in the Ford Fiesta?

Ford Fiesta - Video tutorial

Model: Ford Fiesta Fiesta 4, MK IV, Be91, MK 4 - Years 1996-2002
Part: Wheel
Operation: How to release the spare wheel in the Ford Fiesta?

In this tutorial we can see how to remove the spare wheel in the Ford Fiesta MK4, a very simple operation. It is located under the vehicle, in the rear area, instead of in the classic housing of the luggage compartment. To disassemble it, in the event of a puncture, for example, we start by opening the rear door, then we remove the panel from the right wall so that we can take the tools. Subsequently, we locate and unscrew the single fixing bolt placed right near the lock, unscrew it until the wheel rests on the ground and finally unhook it from the support.


Posted on 21 April 2024 by ScegliAuto



How do you change the wheel of the Ford Fiesta?
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) In order to change the wheel of the Ford Fiesta, you must open the tailgate of the luggage compartment and lift the carpet that serves as flooring. U
Spare wheel disassembly on Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Removing the wheel of a Ford Fiesta. Let's see how the damaged wheel of the car is removed. We lift the tailgate and take the wheel removal kit. We p
How do you replace the rear wheel of a Ford Fiesta?
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) To replace the rear wheel, you need to insert the jack into the frame at the wheel and turn its handle to lift the car. Once it is lifted, you can lo

    Frequently Asked Questions

    • Fiesta 2017-2023 - Where is the Ford Fiesta tire inflation kit located? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos