Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you refuel at the Ford Fiesta?

Model: Ford Fiesta MK VI, MK 6, Fiesta 6 - Years 2008-2017
Part: Checks and maintenance

In order to refuel at the Ford Fiesta you must park your car in front of the pump and insert the amount inside the machine: after the money has been inserted, you will need to press the button with the corresponding pump number. Then the delivery will have been enabled and it will be possible to open the fuel flap from the special button inside the car: at this point it will be possible to insert the hose inside the tank cap and press the lever until all the fuel will not be spilled. Then you can close the flap and reposition the tube.

Posted on 24 March 2022 by ScegliAuto

Video tutorial

Related tutorials

How to Top Up the Windscreen Washer Fluid on a Ford Fiesta
How to Top Up the Windscreen Washer Fluid on a Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, MK 6, Fiesta 6) Follow these steps to top up the windscreen washer fluid on a Ford Fiesta: Pull the plastic lever located at the bottom right of the steering wheel, …
How do you open the fuel tank cap of the Ford Fiesta?
How do you open the fuel tank cap of the Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Refueling your car is not only necessary but also one of the most common tasks for a driver. In this regard, if you have no idea how to open the fuel…
How to open and close the Ford Fiesta fuel filler flap
How to open and close the Ford Fiesta fuel filler flap
Ford Fiesta (2008-2017 / MK VI, MK 6, Fiesta 6) We will see in this guide the steps that will allow us to open and close the fuel cap of the Ford Fiesta. First of all let's open the car from the re…

    Frequently Asked Questions

    • Fiesta 2008-2017 - What does MCA mean on a Ford Fiesta? Read answer

How to Change the Diesel Filter on a Renault Captur 1.5 dCi

The diesel filter on the Renault Captur is always of the immersion type, but instead of being located at the top of the engine bay, it is positioned lower, inside the front right wheel arch (passenger side), practically under the headlamp. To replace it, it is advisable to lift the vehicle, remove the front right wheel and the corresponding inner lining to access the filter location. Unscrew the fastening nuts of the support clamp to extract it from its housing and disconnect the connector and pipes. At this point, unscrew the fixing screws of the cap, remove the old filter and insert the new one, also replacing the O-ring seals, and then reverse the steps for installation. Before starting the engine, turn the ignition on and off several times to allow the filter to fill.

Watch the video!


by ScegliAuto

More videos