Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Pump on a Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Pump

See other generations:
Video tutorial

This tutorial shows how to replace the clutch pump on a Ford Fiesta, a very simple and quick operation. First, enter the cabin, then open the small glove compartment on the driver's side, unscrew the two indicated screws, and remove the lower dashboard section.

Next, go to the pedal area, locate the two bolts securing the pump, and unscrew them with a 10mm spanner. At this point, move to the engine bay, disconnect the pump pipe, and remove it from its housing.

To install the replacement, simply follow the reverse procedure, but remember to bleed the fluid and top it up.


Updated on 2 September 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch Pedal Pump on the Ford Fiesta?
How to Replace the Clutch Pedal Pump on the Ford Fiesta?
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) To replace the clutch pedal pump, you need to remove the old pump, taking care with the lever connected to the pedal. To insert the new pump with the…
How to Replace the Clutch Pedal Pump on a Ford Fiesta?
How to Replace the Clutch Pedal Pump on a Ford Fiesta?
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) To replace the clutch pedal pump on a Ford Fiesta, remove the carpet located in the driver's footwell, behind the pedals. This will provide access to…
How to Replace the Fuel Pump on the Ford Fiesta - Ka - Mondeo
How to Replace the Fuel Pump on the Ford Fiesta - Ka - Mondeo
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) In this guide, we will cover the main instructions on how to remove and replace the fuel pump on the Ford Fiesta, as well as the Ka and Mondeo. First…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos