Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Pedal Pump on the Ford Fiesta?

Model: Ford Fiesta MK V, MK 5, Fiesta 5 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Clutch

See other generations:
Video tutorial

To replace the clutch pedal pump, you need to remove the old pump, taking care with the lever connected to the pedal. To insert the new pump with the corresponding lever, access it from the engine bay. To make access easier, it is advisable to loosen the screws securing the grille located just below the windscreen, removing it completely.

Then, insert the clutch pedal pump next to the master cylinder, connecting it to the corresponding hoses. After installation, check the proper functioning of the clutch pedal.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch Pedal Pump on a Ford Fiesta?
How to Replace the Clutch Pedal Pump on a Ford Fiesta?
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) To replace the clutch pedal pump on a Ford Fiesta, remove the carpet located in the driver's footwell, behind the pedals. This will provide access to…
How to Replace the Clutch Pedal Sensor on a Ford Fiesta?
How to Replace the Clutch Pedal Sensor on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this tutorial, see how to replace the clutch pedal sensor on a Ford Fiesta, a very simple and quick operation. Before proceeding, ensure that the …
How to Replace the Clutch Pump on a Ford Fiesta?
How to Replace the Clutch Pump on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) This tutorial shows how to replace the clutch pump on a Ford Fiesta, a very simple and quick operation. First, enter the cabin, then open the small g…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos