Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on the Ford Fiesta - Ka - Mondeo

Model: Ford Fiesta Fiesta 4, Be91, MK 4, MK IV - Years 1996-2002
Part: Fuel pump

In this guide, we will cover the main instructions on how to remove and replace the fuel pump on the Ford Fiesta, as well as the Ka and Mondeo. First, access the top of the fuel tank to locate the fuel pump; then disconnect the fuel line using two pliers, as shown in the video. Next, unscrew the screws or the ring of the pump to remove it, disconnecting the electrical connector of the fuel level sensor; then replace the pump or float with the new one, using the original spare part!

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Pump on a Ford Fiesta
How to Replace the Fuel Pump on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) You need to replace the fuel pump if it no longer works. Here’s how to remove it. Open the rear hatch, remove the rear seats, and unscrew the securin…
How to Remove the Fuel Pump from a Ford Fiesta
How to Remove the Fuel Pump from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to remove the fuel pump from a Ford Fiesta? First, disconnect the battery cables and lift the car on a column lift. Use a socket spanner to undo …
How to Change the Fuel Pump on a Ford Fiesta
How to Change the Fuel Pump on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to change the fuel pump on a Ford Fiesta? First, disconnect the battery cables, then remove the rear seat cushions (as shown in the video). Use a…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - Where is the diesel pump located on the Ford Fiesta 1.4 Tdci? Read answer
    • Fiesta 2008-2017 - Where is the Ford Fiesta fuel pump located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos