Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to disassembling the fuel pump of the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Fuel pump

Shortly, we will see the main instructions that will allow us to disassemble and replace the fuel pump or the float of the Ford Fiesta. First of all, we open the rear doors and start disassembling and removing the rear seat; then we remove the pump cover that we find underneath, disconnecting the fuel lines and then the electrical connector of the fuel level sensor. At this point, we unscrew the pump ring to remove it from the tank, replacing it with the new original one; we apply the reverse process for reassembly!

Posted on 30 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Fuel Pump on a Ford Fiesta
Removing the Fuel Pump on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to remove the fuel pump from a Ford Fiesta? First, disconnect the battery cables. Then, remove the rear seat of the car. Use a screwdriver to uns…
Where is the fuel pump relay located in the Ford Fiesta?
Where is the fuel pump relay located in the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this video, you can see where the fuel pump relay is located in the Ford Fiesta, one of the first components to check if it suddenly stops working…
Where are the fuses located in the Ford Fiesta?
Where are the fuses located in the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) The fuses in the Ford Fiesta are divided between two dedicated boxes located within the vehicle: this model has two fuse boxes. The first is located …

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - Where is the diesel pump located on the Ford Fiesta 1.4 Tdci? Read answer
    • Fiesta 2008-2017 - Where is the Ford Fiesta fuel pump located? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos