Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel pump in the Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuel pump

See other generations:
Video tutorial

In this tutorial we can see how to replace the fuel pump in the Ford Fiesta, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then open the tank cap to release the internal pressure of the circuit.

Next, separate the rear seat from the base by pulling it upwards, open the large central cap and disconnect both the connector and the tube. At this point, all that remains is to unscrew the outer ring, helping if necessary with a hammer, extract the pump from the housing and install the replacement following the reverse procedure.


Posted on 25 September 2025 by ScegliAuto


Related tutorials

Removing the Fuel Pump on a Ford Fiesta
Removing the Fuel Pump on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) How to remove the fuel pump from a Ford Fiesta? First, disconnect the battery cables. Then, remove the rear seat of the car. Use a screwdriver to uns…
How to Replace the Fuel Pump on the Ford Fiesta - Ka - Mondeo
How to Replace the Fuel Pump on the Ford Fiesta - Ka - Mondeo
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) In this guide, we will cover the main instructions on how to remove and replace the fuel pump on the Ford Fiesta, as well as the Ka and Mondeo. First…
How to Remove the Fuel Pump on a Ford Fiesta
How to Remove the Fuel Pump on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) How to remove the fuel pump on a Ford Fiesta? Start by disconnecting the battery cables, then remove the rear seat cushions of the car. Use a socket …

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - Where is the Ford Fiesta fuel pump located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos