Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Pump on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuel pump

See other generations:
Video tutorial

How to remove the fuel pump on a Ford Fiesta? Start by disconnecting the battery cables, then remove the rear seat cushions of the car. Use a socket wrench to unscrew the securing screws of the metal cap, remove it from its housing, and use absorbent paper around the perimeter to soak up any liquid leaks.

Unscrew the large securing pin of the fuel pump, disconnect the power connectors and the liquid circulation pipes.

Extract the floating fuel pump from its housing along with the attached parts. Finally, fit a new piece.


Updated on 2 March 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Pump from a Ford Fiesta
How to Remove the Fuel Pump from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) How to remove the fuel pump from a Ford Fiesta? First, disconnect the battery cables and lift the car on a column lift. Use a socket spanner to undo …
How to Replace the Fuel Pump on the Ford Fiesta - Ka - Mondeo
How to Replace the Fuel Pump on the Ford Fiesta - Ka - Mondeo
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) In this guide, we will cover the main instructions on how to remove and replace the fuel pump on the Ford Fiesta, as well as the Ka and Mondeo. First…
Guide to Removing the Fuel Pump from the Ford Fiesta
Guide to Removing the Fuel Pump from the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Here are the main instructions to help you remove and replace the fuel pump or float in the Ford Fiesta. First, open the rear doors and begin removin…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - Where is the Ford Fiesta fuel pump located? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos