Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on the Ford Fiesta MK6 (2011)

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Fuel pump

Learn how to dismantle and replace the fuel pump or the fuel sender on the sixth series Ford Fiesta (2011) by following these simple steps. First, open the rear doors and start by removing the rear seat by lifting it upwards; then remove the pump cover and disconnect the electrical connector of the fuel level sensor, followed by disconnecting the fuel pipes as shown in the video. Now, unscrew the pump ring to remove it and replace it with the new one, applying the reverse procedure for reassembly!

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fuel Pump from a Ford Fiesta
How to Remove the Fuel Pump from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to remove the fuel pump from a Ford Fiesta? First, disconnect the battery cables and lift the car on a column lift. Use a socket spanner to undo …
How to Change the Fuel Pump on a Ford Fiesta
How to Change the Fuel Pump on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to change the fuel pump on a Ford Fiesta? First, disconnect the battery cables, then remove the rear seat cushions (as shown in the video). Use a…
How to Remove the Fuel Pump on a Ford Fiesta
How to Remove the Fuel Pump on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to remove the fuel pump on a Ford Fiesta? Start by disconnecting the battery cables, then remove the rear seat cushions of the car. Use a socket …

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - Where is the diesel pump located on the Ford Fiesta 1.4 Tdci? Read answer
    • Fiesta 2008-2017 - Where is the Ford Fiesta fuel pump located? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos