Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Roof Railing on the Ford F-150 [USA]

Model: Ford F-150 MK 13 - Years 2015-2020
Part: Roof rack bars

Remove the crossbar and take the two supports, insert them onto the rail of the crossbar and slide them in until they reach the specified measurement for the vehicle model, indicated on the side of the rail, and tighten the fastening screw. Install the two end caps on the crossbar by applying pressure for proper locking. After that, take the bar and position it over the roof of the vehicle, ensuring it rests on the vehicle's longitudinal profile and between the two grooves. Position it, measuring to align it perfectly with the windshield and the other side. Take the tightening hook that must attach to the upper inner profile of the door and be inserted into the support of the bar to be locked, then tighten the fastening screw and close the finishing cover. Repeat the same procedure for the other bar.

Updated on 14 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear door of the Ford F-150 truck bed
How to disassemble the rear door of the Ford F-150 truck bed
Ford F-150 (2015-2020 / MK 13) Below we will see the instructions that will allow us to disassemble and replace the rear door of the Ford F-150 truck bed. First, move to the rear o…
How to Remove the Front Seat of the Ford F-150
How to Remove the Front Seat of the Ford F-150
Ford F-150 (2009-2014 / MK 12) If you want to remove the front seat of your Ford F-150 yourself, read this guide and follow the few steps described. First, access the seat you inte…
How to remove the headrests of the Ford F150
How to remove the headrests of the Ford F150
Ford F-150 (1997-2004 / MK 10) In this video we can see how to remove the headrests of the 10th generation Ford F-150 pick-up truck: on the base of the headrest there are buttons t…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos