Do it yourself
| ||||
|
Ford Transit - Video tutorial
Model: Ford Transit
MK 8
- Years 2014-2023 There is not just one fuse box inside your Ford Transit Custom, but two. Below we will find out which is the exact position in which both boxes are located. Before proceeding, we recommend that you turn off the vehicle completely and disconnect the battery so as to eliminate any current flow. Go to the front hood, lift it and locate the fuse box at the top of the engine compartment. Remove the cover and immediately below you will have access to the fuses. The second box, on the other hand, is located below the glove compartment and to reach it, it is therefore necessary to first remove the compartment itself.
Posted on 9 May 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.077
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |