Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of the Rear Headlamp Bulb

Model: Ford Fiesta Fiesta 4, Be91, MK 4, MK IV - Years 1996-2002
Part: Tail light bulb

This video shows how to remove and replace the bulb of the rear headlamp of your car. First, identify the bulb to be replaced and obtain a compatible replacement suitable for your vehicle. Next, proceed to remove the bulb from inside the boot; remove a piece of carpet to access the area of interest, which is the rear section of the headlamp. Once done, start by removing the rear cover of the headlamp, which is simply secured by pressure, and reach the circuit of the headlamp where the bulbs are located; replace the faulty bulb and reassemble everything.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Ford Fiesta 6
How to replace the rear headlight bulb of the Ford Fiesta 6
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Thanks to the procedure described in the following mini guide, you will be able to successfully replace the faulty bulb inside the rear headlight of …
How to replace the rear headlight bulb of the Ford Fiesta
How to replace the rear headlight bulb of the Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) The following video guide will provide us with the tools to independently replace the rear light bulbs of the Ford Fiesta mk8. Let's start the replac…
How to replace the rear headlight bulb of the 2011 Ford Fiesta
How to replace the rear headlight bulb of the 2011 Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) With the help of the following video tutorials, we will explain how to replace the rear headlight bulb of a 2011 Ford Fiesta gasoline vehicle. To per…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos