Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Ford Fiesta?

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Door trim panel

In this tutorial, you will see how to remove the front door panel on a Ford Fiesta, a very simple operation. First, use a flathead screwdriver or preferably a plastic spatula to remove the window control console. Then, unscrew the two screws underneath it using a Torx T25 key. Next, remove the internal cover of the mirror and start to unclip the panel from the bottom until you completely remove it. Finally, disconnect the lock cable and refit the replacement part by following the reverse procedure.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel on the Ford Fiesta
How to Remove the Door Panel on the Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) You can remove the door panel on the Ford Fiesta by using a tool to pry off the triangular panel near the wing mirror and the one located inside the …
How to Remove the Rear Door Panel of a Ford Fiesta
How to Remove the Rear Door Panel of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before you can start, open the rear door of your Ford Fiesta. Begin by unclipping and removing the window winder by simply releasing the internal fix…
How to Remove the Front Door Panel on a Ford Fiesta
How to Remove the Front Door Panel on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before you can start, open the front door of your Ford Fiesta. Begin by unclipping, extracting, and removing the inserts of the door panel, using a t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos