Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Ford Fiesta

Model: Ford Fiesta Fiesta 4, Be91, MK 4, MK IV - Years 1996-2002
Part: Door trim panel

Is the door panel to be removed? Let’s see how to take off the door panel of a Ford Fiesta. Unscrew the screws located in the space of the upper door opening lever and the screws present in the handle (after removing the plastic screw covers). Remove the window winder, unscrew the remaining screws on the door panel, and detach the retaining clips. Once all screws are removed, pull the panel away with your hands and unclip it from the door (disconnect the wiring harness and the opening cable). Replace the door panel with a new one.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Door Panel of a Ford Fiesta
How to Remove the Front Door Panel of a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Before starting, open the front door of your Ford Fiesta. Begin by prising out and removing the window switch panel, then disconnect the correspondin…
How to Remove the Front Door Panel of a Ford Fiesta
How to Remove the Front Door Panel of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before you begin, open the front door of your Ford Fiesta. Using a thin but sturdy tool, start by prying, pulling out, and removing the door panel in…
How to Remove the Rear Door Panel of a Ford Fiesta?
How to Remove the Rear Door Panel of a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before starting, open the rear door of your Ford Fiesta. Begin by unclipping and removing the window winder by simply releasing the internal fixing c…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos