Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How do you replace the fuel pump of the Ford Focus?

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Fuel pump
Operation: How do you replace the fuel pump of the Ford Focus?

In order to replace the fuel pump it is necessary to remove the rear seat cushions, loosening the relative fixing screws. Once the cushions are removed, you will be able to access the components at the bottom. Here, inside the circular slot, you will find the fuel pump: the latter can be removed by disconnecting all the pipes and connectors connected to it. Furthermore, by unscrewing the fixing bolts, the old pump can be removed from its housing and replaced with a new spare part, covering it with the seats.


Posted on 27 June 2022 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - How much does it cost to overhaul the Ford Focus diesel pump? Read Answer
    • Focus 2011-2018 - How much does it cost to replace the fuel pump on the Ford Focus 1.8 TDCi? Read Answer
    • Focus 2011-2018 - Where is the fuel pump of the Ford Focus 1.6 Tdci? Read Answer
    • Focus 2011-2018 - Where is the diesel pump located in the Ford Focus estate? Read Answer
    • Focus 2011-2018 - Where is the inertia switch on the Ford Focus 1.6? Read Answer
    • Focus 1998-2004 - Where is the 2000 Ford Focus fuel pump located? Read Answer
    • Focus 2011-2018 - Where is the fuel pump located in a diesel Ford Focus 1.8? Read Answer
    • Focus 2004-2011 - Where is the Ford Focus fuel pump located? Read Answer
    • Focus 2004-2011 - Where is the fuel float of the Ford Focus? Read Answer
    • Focus 2004-2011 - How much does the Ford Focus float cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos