Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Install the Engine Cover on the Ford Focus 3

Model: Ford Focus MK 3 - Years 2011-2018

In this short video, you will see how to remove and install the engine cover found in the engine bay of the Ford Focus third series with TDCI engine. First, open the bonnet of your car by pulling the lever from inside; then, gently grasp the upper engine protection and unclip it from the sides to remove it, as shown in the video. At this point, reattach it to the supports; to do this, position it on the hooks and push down, ensuring it is securely clipped on all sides of the engine.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil in a Ford Focus
How to Replace the Engine Oil in a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Before starting, open the bonnet of your Ford Focus. Begin by unscrewing and removing the top oil filler cap. Next, lift the front of the car. Then, …
Engine Mount Replacement on Ford Focus 2
Engine Mount Replacement on Ford Focus 2
Ford Focus (2004-2011 / MK 2, Focus 2) Today, you will learn how to replace the engine mount on a Ford Focus, a maintenance task that is not difficult at all. Open the bonnet and place the…
How to Replace the Oil Sump on a Ford Focus
How to Replace the Oil Sump on a Ford Focus
Ford Focus (1998-2004 / MK 1) Follow these steps to remove and replace the oil sump on a Ford Focus engine. Lift the car on a column lift and (at your preferred height) use a sock…

    Frequently Asked Questions

    • Focus 2004-2011 - Where are the fuse boxes in the Ford Focus Mk2? Read answer

How to Remove the Headrests from a Fiat Panda

Below are the instructions to remove the headrests, both front and rear, from the Fiat Panda. First, get inside the vehicle and press and hold the side button located at the base of the headrest. Then, while holding the button, pull the headrest upwards to remove it, as shown in the video. At this point, perform the same operation on the other headrests. Now, simply insert them back in while holding the button, and finally adjust the height of all the headrests!

Watch the video!


by ScegliAuto

More videos