Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Mount Replacement on Ford Focus 2

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Engine mount

See other generations:
Video tutorial

Today, you will learn how to replace the engine mount on a Ford Focus, a maintenance task that is not difficult at all. Open the bonnet and place the support prop in position. Remove the engine cover.

Place the jack under the car to support the engine at the level of the oil sump. Unscrew the nuts and bolts securing the engine mount and remove it. Proceed in reverse for installation: position the mount and screw in the bolts and nut. At this point, you can remove the jack supporting the oil sump.

Refit the engine cover and close the bonnet.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

Replacing Engine Mount on Ford Focus 1.6 TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) In this tutorial, you will learn how to remove and replace the engine mount on a second-generation Ford Focus. First, open the bonnet and remove the …
Replacing the Engine Mount on Ford Focus mk2
Replacing the Engine Mount on Ford Focus mk2
Ford Focus (2004-2011 / MK 2, Focus 2) For the replacement of the mount, you will need: two socket wrenches, an extension to reach deeper areas, an 8mm socket, a T30 Torx key, a 19mm and a…
How to Replace the Right Engine Mount on a Ford Focus?
How to Replace the Right Engine Mount on a Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) In this tutorial, see how to replace the right engine mount on a Ford Focus, a simple task valid for the 1.6 TDCi version. First, wait for the engine…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos