Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Mount on Ford Focus mk2

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Engine mount

For the replacement of the mount, you will need: two socket wrenches, an extension to reach deeper areas, an 8mm socket, a T30 Torx key, a 19mm and a 15mm socket, and a jack. Remove the cover under the engine and support the engine with the jack. Remove the coolant reservoir and unscrew the screw to remove the bracket for the coolant control unit. At this point, remove the clip following the bracket to detach it by pulling upwards. Once these components are removed, you can access the three screws holding the engine mount.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Engine Mount on Ford Focus 1.6 TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) In this tutorial, you will learn how to remove and replace the engine mount on a second-generation Ford Focus. First, open the bonnet and remove the …
How to Replace the Right Engine Mount on a Ford Focus?
How to Replace the Right Engine Mount on a Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) In this tutorial, see how to replace the right engine mount on a Ford Focus, a simple task valid for the 1.6 TDCi version. First, wait for the engine…
Engine Mount Replacement on Ford Focus 2
Engine Mount Replacement on Ford Focus 2
Ford Focus (2004-2011 / MK 2, Focus 2) Today, you will learn how to replace the engine mount on a Ford Focus, a maintenance task that is not difficult at all. Open the bonnet and place the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos