Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil in a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Engine oil

See other generations:
Video tutorial

Before starting, open the bonnet of your Ford Focus. Begin by unscrewing and removing the top oil filler cap. Next, lift the front of the car. Then, unscrew and remove the screws securing the lower cover of the oil sump, and remove the oil sump itself.

At this point, unscrew and remove the lower drain nut of the oil sump. This will allow the used engine oil to drain out. Once this step is complete, re-screw the lower drain nut, lower the front of the vehicle, and add new oil through the filler hole, completing the replacement.


Updated on 5 May 2026 by ScegliAuto


Related tutorials

Oil Change for a Ford Focus
Oil Change for a Ford Focus
Ford Focus (2011-2018 / MK 3) Perform an oil change on a Ford Focus. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard…
How to change the engine oil and oil filter of the Ford Focus
How to change the engine oil and oil filter of the Ford Focus
Ford Focus (2011-2018 / MK 3) In a few simple steps, replace the engine oil and oil filter, performing the routine maintenance service on the Ford Focus. First, raise the vehicle …
How to Change Oil Filter on Ford Focus
How to Change Oil Filter on Ford Focus
Ford Focus (2011-2018 / MK 3) Replacing the oil and worn filter on a Ford Focus? Here's how to replace everything. Open the car door and pull up the engine compartment release lev…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos