Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Apply a Protective Film on the Ford Fiesta Headlights?

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Accessory kit

See other generations:
Video tutorial

Over time, headlights can yellow due to exposure to sunlight and other weather elements. They may also be subject to small scratches.

To prevent this, you can apply a protective film on them. Visit an auto parts and accessories retailer to purchase a compatible film for your Ford Fiesta headlights and follow the video to learn how to apply it. Clean the headlight thoroughly, leaving it wet, then apply the film while respecting the margins and press it down using a towel and a hairdryer to dry the adhesive.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

Removing Front Headlights on Ford Fiesta
Removing Front Headlights on Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In this video tutorial, you will learn how to remove the headlights and replace the bulbs on the Ford Fiesta. First, open the engine bonnet: release …
Removing the External Door Handle on a Ford Fiesta MK6
Removing the External Door Handle on a Ford Fiesta MK6
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In today's tutorial, you will see the steps to remove the external door handle on a Ford Fiesta MK6. Open the front door and use a crosshead screwdri…
How to adjust the headlight height of the Ford Fiesta
How to adjust the headlight height of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Below are the steps that will allow you to adjust the height of the front headlights of the Ford Fiesta. Before adjusting the headlights, set the sel…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos