Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Door Panel in a Ford F-250 Pickup?

Model: Ford F-250 P473 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Door trim panel

See other generations:
Video tutorial

In this tutorial, you will see how to remove the inner door panel in a Ford F-250 pickup. This is a very simple task that requires only a 7mm socket wrench and a flathead screwdriver.

Start by removing the small panel under the handle, then unscrew the two bolts. Next, disengage the switch panel for the window controls and locks, disconnect the connectors, and unscrew the last two bolts located at the bottom.

Finally, disengage the inner cover of the mirror and remove the panel from the door.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

Ford F-250 (2017-2022 / P558) .. see how to remove the steering wheel on a Ford F-250 pickup, a very simple operation. Before doing this, disconnect the negative terminal of the battery.. …
Ford F-250 (2017-2022 / P558) .. Replacing the cabin air filter in the Ford F-250 pickup is a simple and quick task. First, since it is located behind the glove compartment on the.. …
Ford F-250 (2011-2016 / P473) In this tutorial we can see how to program a remote control in the Ford F-250 pick-up, a very simple and quick operation. To do this, we will necessa…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Replace the Front Headlamp Bulb in a Kia Stonic?

Regardless of the type of bulb to be used, for example, the video shows how to install an H7 in a headlamp that involves similar work steps to the Kia Stonic, it is important to ensure that the instrument panel and lights are turned off. To replace the front headlamp bulb on the vehicle in question, open the bonnet, remove the plastic rear cap of the headlamp unit, unclip the metal fastener, and extract the bulb holder. Finally, simply remove the bulb to be replaced from the holder, insert the new one, and reassemble everything.

Watch the video!


by ScegliAuto

More videos