Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tailgate Handle on a Ford F-250

Model: Ford F-250 Phn131 - Years 1999-2007
Part: Handle

This guide shows you how to replace the tailgate handle on a Ford F-250. First, open the tailgate; then remove the eight screws holding the panel in place as shown at minute 0:40. At this point, you will see the handle mechanism from the back. Remove the two 11 millimeter bolts and slide out the handle. Using a screwdriver, extract the lock from the removed handle and insert it into the new handle. Now, position the new part, reinstall the two bolts to secure it properly, and reattach the panel with its eight bolts.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Tail Light Bulb on a Ford F-250
How to Replace the Rear Tail Light Bulb on a Ford F-250
Ford F-250 (2011-2016 / P473) To replace the rear tail light bulb on a Ford F-250, lower the tailgate of the truck. This will allow you to loosen the bolt located between the tail…
How to Replace the Rear Headlight in a Ford F-250
How to Replace the Rear Headlight in a Ford F-250
Ford F-250 (2017-2022 / P558) To replace the rear headlight in a Ford F-250, lower the tailgate to access the side screws securing the headlight. Loosen these screws to extract th…
How to Replace the Exterior Door Handle on the Ford F-250
How to Replace the Exterior Door Handle on the Ford F-250
Ford F-250 (1999-2007 / Phn131) In this brief and simple guide, see how to disassemble and replace the exterior door handle on the front door of the Ford F-250. First, open the fron…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos