Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exterior Door Handle on the Ford F-250

Model: Ford F-250 Phn131 - Years 1999-2007
Part: Handle

In this brief and simple guide, see how to disassemble and replace the exterior door handle on the front door of the Ford F-250. First, open the front door and start by removing the inner door panel; to do this, unscrew all the fastening screws and also remove the window switch panel, disconnecting the electrical connector found underneath, as shown in the video. At this point, unscrew the fastening screws for the handle, disconnecting the opening cable; remove it and replace it with the new one, following the video tutorial to the end!

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Tailgate Handle on a Ford F-250
How to Replace the Tailgate Handle on a Ford F-250
Ford F-250 (1999-2007 / Phn131) This guide shows you how to replace the tailgate handle on a Ford F-250. First, open the tailgate; then remove the eight screws holding the panel in …
How to Remove the Door Panel in a Ford F-250 Pickup?
How to Remove the Door Panel in a Ford F-250 Pickup?
Ford F-250 (2011-2016 / P473) In this tutorial, you will see how to remove the inner door panel in a Ford F-250 pickup. This is a very simple task that requires only a 7mm socket …
How to Remove the Door Panel of the Ford F-250?
How to Remove the Door Panel of the Ford F-250?
Ford F-250 (1999-2007 / Phn131) To remove the door panel of the Ford F-250, use a tool like a screwdriver to pry up the window switch panel. This will allow you to disconnect its co…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos