Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Ford Fiesta ST MK6

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Timing belt

In today's video, we will cover all the steps needed to remove and replace the timing belt on the sixth generation Ford Fiesta ST. First, lift the vehicle and remove the front right wheel. Next, remove the wheel arch liner and take off the serpentine belt, followed by removing the crankshaft pulley. At this point, remove the belt tensioner, then unscrew the bolts of the timing cover. Take all necessary references for the correct replacement of the belt, and follow the video until the end!

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Belt on a Ford Fiesta?
How to Replace the Timing Belt on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Hello, today's guide aims to replace the timing belt on our Ford Fiesta. Start by lifting the front of the vehicle, then remove the front right wheel…
How to replace the timing belt of the Ford Fiesta 1.0 Ecoboost.
How to replace the timing belt of the Ford Fiesta 1.0 Ecoboost.
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Below, we will discover the instructions that will guide us through the disassembly and replacement procedure for the timing belt of the Ford Fiesta …
When and How to Replace the Timing Belt on the Ford Fiesta 1.5 TDCI
When and How to Replace the Timing Belt on the Ford Fiesta 1.5 TDCI
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today, discover how to remove and replace the timing belt on the Ford Fiesta 1.5 TDCI. The manufacturer recommends replacing the timing belt every 10…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos