Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Internal Temperature Sensor in a Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Checks and maintenance

In this tutorial, you will learn how to replace the internal temperature sensor in a Ford Focus, a very simple and quick operation. First, ensure that the key is not in the ignition for safety. Next, locate the small panel on the lower right side of the dashboard on the passenger side, right next to the ignition switch. Once identified, pull it towards you and unclip it to gain access to the sensor. To remove the sensor, simply detach it from the panel and disconnect the connector.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Temperature Sensor on a Ford Focus
How to Replace the Temperature Sensor on a Ford Focus
Ford Focus (1998-2004 / MK 1) To replace the temperature sensor on a Ford Focus, start by removing the 3 spark plugs. Use a screwdriver to remove the top cap from the sensor, disc…
Replacing the Coolant Temperature Sensor of the Ford Focus 2.0L
Replacing the Coolant Temperature Sensor of the Ford Focus 2.0L
Ford Focus (2011-2018 / MK 3) Below are the main instructions to remove and replace the coolant temperature sensor of the Ford Focus 2.0L engine. First, open the bonnet of the veh…
Replacing the External Temperature Sensor on the Ford Focus
Replacing the External Temperature Sensor on the Ford Focus
Ford Focus (2011-2018 / MK 3) In this video tutorial, we will go through the steps to remove and replace the external temperature sensor on the Ford Focus. First, locate the tempe…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos