Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery on a Ford Focus?

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Key

See other generations:
Video tutorial

This video is dedicated not only to the Ford Focus but also to other vehicles from the same manufacturer, such as the Ford Fiesta, Ford C-Max, etc. Fortunately, this is an easy and quick job to perform; all you need is a small flathead screwdriver and nothing else.

At the joint of the remote shell, use the screwdriver to pry it open halfway, gaining access to the battery, model CR2032, that needs to be changed.

At this point, remove the old battery from its slot and install the new one, test its functionality, and close everything up.


Posted on 13 August 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Ford Focus
How to Replace the Key Battery on a Ford Focus
Ford Focus (2011-2018 / MK 3) Start by inserting a thin but sturdy tool into the slot on the side of your Ford Focus key to pry it open. Next, you will need to unclip and remove t…
How to change the battery of the Ford Focus 3 key.
How to change the battery of the Ford Focus 3 key.
Ford Focus (2011-2018 / MK 3) Replacing the battery inside the key of your third-generation Ford Focus is a very simple operation that you can complete in just a few minutes by fo…
Replacing the Key Battery on a 2019 Ford Focus
Replacing the Key Battery on a 2019 Ford Focus
Ford Focus (2018-2025 / MK 4) The video shows how to replace the battery in a 2019 Ford Focus key, but it also applies to a Ford Fiesta. It is a very simple operation, but be care…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos