Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of the Ford Focus 3 key.

Model: Ford Focus MK 3 - Years 2011-2018
Part: Key

Replacing the battery inside the key of your third-generation Ford Focus is a very simple operation that you can complete in just a few minutes by following the steps described below. First, purchase a new CR2032 battery and make sure you have a flathead screwdriver on hand. At this point, take the car key and the screwdriver and use the latter to easily remove the key cover. Next, replace the exhausted battery with the new one and then reassemble the key cover correctly.

Posted on 17 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Key Fob Battery of a Ford Focus
How to Change the Key Fob Battery of a Ford Focus
Ford Focus (2011-2018 / MK 3) How to change the key fob battery of a Ford Focus? Follow this detailed guide. Take your key fob and insert a screwdriver between the two ends of the…
How to Replace the Key Battery on the Ford Focus/Ford Fiesta
How to Replace the Key Battery on the Ford Focus/Ford Fiesta
Ford Focus (2018-2025 / MK 4) To change the battery of the Ford Fiesta/Focus key, you will need a small flathead screwdriver and a new battery (CR2032, 3 volts). Start by removing…
How to Replace the Key Battery on a Ford Focus
How to Replace the Key Battery on a Ford Focus
Ford Focus (2011-2018 / MK 3) Start by inserting a thin but sturdy tool into the slot on the side of your Ford Focus key to pry it open. Next, you will need to unclip and remove t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos