Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Filter on a 2006 Ford F350 Super Duty

Model: Ford F-350 Phn131 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Engine oil

See other generations:
Video tutorial

In the following video, you will see how to change the engine oil and filter on a 2006 Ford F350. The first step is to replace the filter. Open the hood and unscrew the cap of the filter to be replaced.

Once you notice that the filter is loose, pull it out and place it in a basin. This will be helpful as the filter will be full of oil, and we risk making a mess in the engine.

After removing it, you can install the new filter and screw its cap back on. To change the engine oil, first position yourself under the vehicle, remove the oil drain plug, and place a basin underneath to collect the oil. When finished, you can add the new engine oil through the designated valve in the hood, as shown in the video.


Updated on 5 June 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headlight of a Ford F350 Super Duty p558
How to Remove the Front Headlight of a Ford F350 Super Duty p558
Ford F-350 (2017-2023 / P558) This guide shows how to replace the front headlight of a Ford F350 Super Duty p558. After opening the hood and removing the radiator protective panel…
A Short Circuit Problem with the Fuse Panel on the Ford F350 Super Duty
A Short Circuit Problem with the Fuse Panel on the Ford F350 Super Duty
Ford F-350 (1999-2007 / Phn131) In this video, we see what could be causing a short circuit on a Ford F350 Super Duty: the battery drains overnight, the headlights turn off, indicat…
Location of the Fuse Boxes on the Ford F-350 Super Duty
Location of the Fuse Boxes on the Ford F-350 Super Duty
Ford F-350 (2011-2016 / P473) In this video, we see the location of the fuse boxes on the Ford F-350, also known as Super Duty: in the cabin, the fuse box is located behind the gl…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos