Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Oil and Oil Filter on the Ford F350

Model: Ford F-350 P473 - Years 2011-2016
Part: Engine oil

To change the oil and oil filter on the Ford F350, use a wrench to unscrew the oil drain plug and let the oil drain into a container. While the oil is draining, use a specific wrench to unscrew the oil filter and let the oil drain into a container. Take the new oil filter, pour some new oil into it, spread some new oil on the gasket, and screw it into place after cleaning the area. After draining the oil, clean the oil drain plug and the plug itself, then screw it back in (the video shows a different plug that can be omitted; just use the original plug). After reinstalling the drain plug, go to the vehicle, insert a funnel into the oil fill hole, and pour in the amount of oil specified by the manufacturer. When you are close to the specified amount, check the oil level by pulling out the dipstick (check the level with the vehicle on level ground and the second time you pull out the dipstick). If the oil level is at the max mark, the operation is complete; otherwise, add more oil. Finally, proceed to reset the oil life; turn on the instrument cluster, go to the "settings" screen, select "advanced settings," press the "OK" button, select "vehicle," press the "OK" button, select "oil life reset," press the "OK" button, press the "OK" button again, wait for the "reset complete" message, and the operation is finished.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford F-350 (2008-2010 / P356) This tutorial shows how to replace the air filter on a Ford F350. Open the hood and unscrew the radiator cap to relieve pressure inside; remove the c…
Ford F-350 (1999-2007 / Phn131) In today's video, you will learn how to remove and replace the starter motor on a Ford F350 by following these simple steps. First, lift the vehicle …
Ford F-350 (1999-2007 / Phn131) In this video, see the diagram and placement of the fuse boxes in the Ford F350 Super Duty: the fuse panel is located at the lower left of the steeri…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos