Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Oil Service Light on My Ford F350?

Model: Ford F-350 P558 - Years 2017-2023
Part: Service warning light

After performing the service on your Ford F350, you need to reset the engine oil light. This operation is simple and quick using only the controls on the steering wheel. First, turn on the ignition and engine, then use the right/left arrows to navigate to the vehicle settings tab and enter the advanced settings sub-tab. At this point, go to the vehicle option and then to the engine oil life option. Press and hold the reset button and wait for the operation to complete. Exit the menu to finish the operation.

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Starter Motor on a Ford F350
How to Replace the Starter Motor on a Ford F350
Ford F-350 (1999-2007 / Phn131) In today's video, you will learn how to remove and replace the starter motor on a Ford F350 by following these simple steps. First, lift the vehicle …
How to Reset the Service Light on a Ford F-350?
How to Reset the Service Light on a Ford F-350?
Ford F-350 (2011-2016 / P473) To reset the Service light on a Ford F-350, turn on the instrument cluster so you can navigate the menu on the display using the directional arrows o…
How to Replace the Air Filter on a Ford F350
How to Replace the Air Filter on a Ford F350
Ford F-350 (2008-2010 / P356) This tutorial shows how to replace the air filter on a Ford F350. Open the hood and unscrew the radiator cap to relieve pressure inside; remove the c…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos