Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to replace the exterior mirror of the Ford Focus 2

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Outside rearview mirror
Operation: How to replace the exterior mirror of the Ford Focus 2

In today's video tutorial we will see how to remove and replace the exterior rearview mirror of the Ford Focus second series, in simple and quick steps. First of all we open the front door and start by removing the plastic cover that we find behind the mirror; then unscrew the torx screw with T25 wrench to remove the plastic bulkhead and the speaker speaker, disconnecting the electrical connector, as shown in the video. At this point we unscrew the fixing screws of the rearview mirror, in order to remove it; we just have to replace it with the new one!


Posted on 6 August 2022 by ScegliAuto

    Frequently Asked Questions

    • Focus 1998-2004 - How much does the Ford Focus 2002 right rearview mirror cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos