Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to remove the exterior mirror of the Ford Focus

Ford Focus - Video tutorial

Model: Ford Focus MK 1 - Years 1998-2004
Part: Outside rearview mirror
Operation: How to remove the exterior mirror of the Ford Focus

The removal of the external rear-view mirror is very simple to carry out and above all it is not necessary to remove the door panel; In fact, it is sufficient to remove the triangular-shaped plastic covering applied precisely in correspondence with the external rear-view mirror by simply pulling it (it is fixed by interlocking); at this point it is possible to access the fixing screw of the mirror itself and then unscrew it in order to be able to move the mirror away from the door pillar just enough to be able to disconnect the electrical adjustment control socket.


Posted on 20 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Focus 1998-2004 - How much does the Ford Focus 2002 right rearview mirror cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos