Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Intake Manifold Gasket

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Engine

The intake manifold is actually made from a single plastic block that also includes the rocker cover. The intake manifold gasket consists of four O-rings to be placed at the four intake ports, plus one to be inserted into the designated groove under the rocker cover. Once you have thoroughly cleaned the gasket seating, apply the gaskets and install the manifold, tightening the respective fixing bolts without exceeding the torque limit, as it is a plastic structure: use a torque wrench.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Intake Manifold Gasket
Replacing the Intake Manifold Gasket
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) Before applying the new gasket to the intake manifold, thoroughly clean the gasket seating on both the cylinder head and manifold sides: remove any d…
Replacing the Intake Manifold Gasket
Replacing the Intake Manifold Gasket
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) Before installing the new intake manifold gasket, it is very important to ensure that the mating surfaces, both on the manifold side and the cylinder…
Replacing the Exhaust Manifold Gasket
Replacing the Exhaust Manifold Gasket
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) Thoroughly clean the gasket seating, removing any dirt and deposits from both the cylinder head and the manifold; then apply the new gasket, aligning…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos