Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How do I remove the Ford Fiesta door panel?

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Door panel
Operation: How do I remove the Ford Fiesta door panel?

In order to remove the Ford Fiesta door panel, you need to remove the caps located on the side of the panel and in the seat of the interior handle. Once these caps have been removed, the underlying screws can be loosened; subsequently it will be necessary to remove the molding of the handrail and also in this case loosen the screws underneath. In this way it will be possible to begin to detach the panel so that the connectors on the inside can be disconnected: once these have also been disconnected, the panel can be completely removed and replaced.


Posted on 17 August 2022 by ScegliAuto



How to remove the front door panel of a Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Before we can begin, we will have to go and open the front door of our Ford Fiesta. So let's start by disengaging, extracting and removing the door p
How to remove the front door panel of a Ford Fiesta?
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Before we begin, we will need to open the front door of our Ford Fiesta. Using a thin but strong tool, we begin by disengaging, pulling out and remov
How to remove the front door panel of a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) Before we begin, we will need to open the front door of our Ford Fiesta. Let's start by disengaging and extracting the window control panel, and then

Other guides that may interest you

    Frequently Asked Questions

    • Fiesta 2017-2023 - How to remove the passenger side door panel in the Ford Fiesta mk7? Read Answer
    • Fiesta 2008-2017 - How to remove the door panel of a Ford Fiesta? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos